3.5mm, 4mm scale narrow gauge couplings
These are etched in 12thou brass and come chemically blackened.
The coupling loops include soft iron wire to uncouple automatically over magnets in the track just like the greenwich couplings.
£3.75
NGWC010
009, H0e gauge 6mm coupling height gauge
Use for checking the height and workings of your Bemo, PECO, Roco, Paul Windle, Greenwich, DG and RT Models (plus any others not mentioned) type couplings with ease.
Use the plain end for marking on your in build models with a pencil the height to which the coupling should be fitted at and also the clearence of the coupling loop.
£0.60
NGWC001
One piece coupling heads to suit kits 4NWK001/002/003/008.
Will also fit some ex bal models wagon kits
The coupling heads are smaller in both surface area and length compared to other makes as it is designed for very small wagons such as the kits referred to above from my range. Cut the middle to fit longer rolling stock.
£1.50
NGWC005
Coupling heads, 3x pairs.
The coupling heads are smaller in both surface area and length compared to other makes as it is designed for very small wagons.
These couplings are the same as NGWC001 but are just the heads, photo to follow
£0.60
NGWC002
One pair of short coupling loops to suit above coupling
Note that the loops are quite short so may not work with some cast coupling heads.
£0.60
NGWC004
One pair of Medium coupling loops
£0.60
NGWC003
One pair of long coupling loops to suit kit 4NWK012
The loops are longer than NGWC002.
These can also be used as a direct replacement on Greenwich coupling heads offering 1mm more side play.
Copyright of RT Models