3.5mm H0e, 4mm 009 gauge & 7mm 09
Narrow gauge locomotive chassis components
Note that on the steam loco parts, TYPE A and TYPE B refer to compatibility of components due to the fixing positions of the cylinders onto the replacement keeperplate only and the length of the connecting rods in accordance.
This doesn't stop the use of either single or double slidebars with the cylinders or mixing other parts if you wish to modify them.
Even though the range has been designed around the Graham Farish outside framed BR Class 08 diesel shunter, the range of coupling rods, cylinders etc can and have been successfully used on various other makes of chassis's.
Steam locomotive valve gear Instructions
Diesel locomotive jack shaft drive Instructions
Vale of Rhiedol 2-6-2T Walchaerts valve gear instructions
Diesel Locomotive chassis parts
£4.10
Replacement Resin Keeperplate to complement NGLP007 & NGLP008 to add a Diesel Jackshaft drive.
4NCP001
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£3.25
4NCP002
Replacement Diesel Locomotive Coupling rods with jackshaft drive extension.
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£1.60
4NCP056
Replacement Diesel Locomotive Coupling rods
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£1.75
4NCP057
Replacement Diesel Locomotive centre jackshaft drive extension.
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£1.75
4NCP003
Diesel weighted outside cranks
£4.25
4NCP052
Ffestiniog Railway Baguley Drewry Harlech Castle 0-6-0DM frames
length of frames is 57.4mm
height from axle centre line is 7.4mm
Designed to fit onto the Graham Farish outside framed class 08 chassis
Steam locomotive chassis parts
£2.00
4NCP100
10x Nickel Silver small rivets as used in our Walchaerts valve gear sets
£4.10
4NCP005
Replacement Resin Keeper plate to suit outside cylindered steam locomotives and cylinders 4NCP030 / 31
Contains 10BA captive nut areas for pony truck and bogies that can be added to each end.
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£1.60
4NCP006
Replacement Steam type Locomotive Coupling rods.
Designed to fit onto the Graham Farish outside framed class 08 chassis. Will also fit the old Graham farish inside framed class 08/J94 chassis but will require the crankpin holes reaming out to fit.
£1.75
4NCP007
Single Slide bar and cross heads
£1.75
4NCP008
Double Slide bars and cross heads
£1.60
4NCP010
13mm connecting rods, centre axle drive,
single and double slide bars, redesigned, TYPE A
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£1.60
4NCP012
15mm connecting rods, centre axle drive, TYPE B
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£1.75
4NCP014
25mm connecting rods, rear axle drive, TYPE A
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£1.60
4NCP015
Etched outside cranks from the De Winton loco kit
4NCP020
Baldwin Walchaerts valve gear and resin cylinders designed to fit to the GEM Baldwin 4-6-0T kit, complete package
£11.50
Above out of stock
Instructions
4NCP023
Baldwin Walchaerts valve gear etch and rivets only.
Designed to fit the Chris ward 3d printed loco kit.
http://www.cwrailways.com/baldwins.html
£9.25
4NCP021
Vale of Rhiedol 2-6-2T Walchaerts valve gear set, includes rivets and connecting rods.
£8.75
Designed to fit onto the Graham Farish outside framed class 08 chassis.
4NCP022
Leek and Manifold railway 2-6-4T Walchaerts valve gear set, includes rivets and connecting rods.
£8.75
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£4.50
4NCP023
Kerr Stuart Skylark / Princess 0-4-2T valve gear set, includes rivets,connecting rods and coupling rods.
Designed to fit onto the Graham Farish outside framed class 08 chassis.
4NCP024
Kerr Stuart Hampton Waterworks 0-4-2T Walchearts valve gear set, includes rivets,connecting rods and coupling rods.
£8.75
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£2.25
4NCP030
Outside Cylinders, TYPE A
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£2.25
4NCP031
Outside Cylinders, TYPE B
Designed to fit onto the Graham Farish outside framed class 08 chassis.
£2.50
4NCP032
Outside Cylinders, Valve of Rhiedol TYPE 1
Designed to fit onto the Graham Farish outside framed class 08 chassis and basic fames 4NCP040
Note this has a small fixing point to match the original 4NCP050 frames.
£2.50
4NCP033
Outside Cylinders, Valve of Rhiedol TYPE 2
Designed to fit onto the Graham Farish outside framed class 08 chassis.
Note this has a Large fixing point which is better and matches the new 4NCP053 and 4NCP054 frames
£2.25
4NCP040
4x pony trucks, designed to be made to any length
Designed to fit onto the Graham Farish outside framed class 08 chassis keeperplate 4NCP005.
£4.25
4NCP051
Leek & Manifold Rly 2-6-4T etched, scale basic frames
Designed to fit onto the Graham Farish outside framed class 08 chassis
£4.25
4NCP053
Vale of Rhiedol Davies & Metcalfe 2-6-2T frames
Designed to fit onto the Graham Farish outside framed class 08 chassis
£4.25
4NCP054
Vale of Rhiedol GWR 2-6-2T etched frames
Designed to fit onto the Graham Farish outside framed class 08 chassis
£17.50
4NCP055
Chivers/Five79 KS Skylark chassis and frames kit.
Includes all valve gear and pony truck wheel.
Designed to fit onto the Graham Farish outside framed class 08 chassis and requires also the Chivers/Five79 loco body kit.
Examples of 08 chassis conversions
Diesel version with a jackshaft drive
Steam single slide bar version
Steam double slide bar version
08 chassis conversion scale drawings
These are free to download by clicking on the appropiate adobe PDF symbols.
You can purchase printed copies at 20p each if you wish / need to.
Graham Farish N gauge class 08 outside framed chassis scaledrawing.
Double slide bar and cross head. TYPE B
Graham Farish N gauge class 08 outside framed chassis scaledrawing.
Diesel version with a jackshaft drive.
Graham Farish N gauge class 08 outside framed chassis scaledrawing.
Single slide bar and cross head. TYPE A
Copyright of RT Models
